• STM32-base
  • Home
  • Overview
  • Roadmap and scope
  • About this project
  • Guides
  • Getting started with STM32
  • Setting up STM32-base
  • Flashing
  • Boards
  • Boards overview
  • Blue pill (STM32F103C8T6)
  • Black pill (STM32F103C8T6)
  • Cheatsheets
  • Linker: Memory regions
  • Device name mapping
  • Makefile options
  • External
  • STM32-base project
  • STMicroelectronics
  • STM32F101C8T6 - ST-LINK V2 Debugger

    JLINK Debugger


    Board Name JLINK Debugger
    Brand Unknown
    Origin AliExpress, China
    Microcontroller Part STM32F103C8T6
    Package LQFP48
    Core Cortex-M3
    FLASH 64KB
    SRAM 10KB
    Max. Clock Speed 72MHz
    Crystals HSE (High Speed External) 8MHz
    LSE (Low Speed External) No
    Power Sources USB connector (+5V)
    Regulator manufacturer Unknown
    Regulator part number Unkown (S20C)</a>
    Regulator package SOT-23-5
    Output +3.3V @ 150mA
    Battery holder No
    Connectivity Headers None
    Specific None
    Debug SWD in (unpopulated 1x4 (1.25mm))
    SWD out (10-pin IDC)
    USB Male A
    I/O LEDs RUN LED (D1, PA9, source)
    Buttons, switches and jumpers None
    Other devices None
    PCB Colour Purple
    Size 30mm x 14mm
    Mounting None
    • Note: This board is intended to use as ST-Link device to program and debug other STM32 and STM8 devices.


    JLINK Debugger

    JLINK Debugger Top view

    JLINK Debugger Bottom view

    SWD out

    Pin Connected to
    RST PB6
    SWDIO PB12
    GND Ground plane
    GND Ground plane
    SWIM PB11
    3.3V +3.3V rail
    3.3V +3.3V rail
    5V +5V rail
    5V +5V rail

    SWD in

    Pin Connected to
      PA13 (SWDIO)
      Ground plane
      PA14 (SWCLK)
      +3.3V rail