• STM32-base
  • Home
  • Overview
  • Roadmap and scope
  • About this project
  • Guides
  • Getting started with STM32
  • Setting up STM32-base
  • Flashing
  • Boards
  • Boards overview
  • Blue pill (STM32F103C8T6)
  • Black pill (STM32F103C8T6)
  • Cheatsheets
  • Linker: Memory regions
  • Device name mapping
  • Makefile options
  • External
  • STM32-base project
  • STMicroelectronics
  • STM32F030F4P6 - STM32F030 DEMO BOARD V1.1

    STM32F030 DEMO BOARD V1.1


    Board Name STM32F030 DEMO BOARD V1.1
    Brand Unknown
    Origin AliExpress, China
    Microcontroller Part STM32F030F4P6
    Package TSSOP20
    Core Cortex-M0
    FLASH 16KB
    SRAM 4KB
    Max. Clock Speed 48MHz
    Crystals HSE (High Speed External) 8MHz
    LSE (Low Speed External) None
    Power Sources Any +3.3V pin (+3.3V)
    Any +5V pin (+5V)
    USB connector (+5V)
    Regulator manufacturer Advanced Monolithic Systems Inc.
    Regulator part number AMS1117
    Regulator package SOT223
    Output +3.3V @ 1000mA
    Battery holder No
    Connectivity Headers 2x 1x11 male dupont (2.54mm)
    Specific Serial (1x4 male dupont (2.54mm))
    Debug SWD (1x4 male dupont (2.54mm))
    USB Micro (+5V power only)
    I/O LEDs Power LED (+3.3V)
    User LED (PA4, sink)
    Buttons, switches and jumpers Reset button (NRST, active low)
    2-way jumper (BOOT0)
    Other devices None
    PCB Colour Blue
    Size 45mm x 30mm
    Mounting 4 mounting holes (M3)
    • Note: Because the STM32F030F4P6 does not support USB, only the power pins on the USB connector are connected.
    • Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.


    STM32F030 DEMO BOARD V1.1

    STM32F030 DEMO BOARD V1.1 Top view

    STM32F030 DEMO BOARD V1.1 Bottom view

    Header 1

    Pin Connected to
    5V +5V rail
    5V +5V rail
    PA14 PA14
    PA13 PA13
    PA10 PA10
    PA9 PA9
    PB1 PB1
    PA7 PA7
    PA6 PA6
    PA5 PA5
    3V3 +3.3V rail

    Header 2

    Pin Connected to
    GND Ground plane
    PA4 PA4
    PA3 PA3
    PA2 PA2
    PA1 PA1
    PA0 PA0
    PF1 PF1
    PF0 PF0


    Pin Connected to
    VCC +5V rail
    D- N.C.
    D+ N.C.
    ID N.C.
    GND Ground plane


    Pin Connected to
    3V3 +3.3V rail
    GND Ground plane
    TXD PA9
    RXD PA10


    Pin Connected to
    3V3 +3.3V rail
    DIO PA13
    CLK PA14
    GND Ground plane