• STM32-base
  • Home
  • Overview
  • Roadmap and scope
  • About this project
  • Guides
  • Getting started with STM32
  • Setting up STM32-base
  • Flashing
  • Boards
  • Boards overview
  • Blue pill (STM32F103C8T6)
  • Black pill (STM32F103C8T6)
  • Cheatsheets
  • Linker: Memory blocks
  • Device name mapping
  • Makefile options
  • External
  • STM32-base project
  • STMicroelectronics
  • STM32F030F4P6 - vcc-gnd.com

    STM32F030F4P6 vcc-gnd.com

    Overview

    Board Name vcc-gnd.com
    Brand vcc-gnd.com
    Origin AliExpress, China
    Microcontroller Part STM32F030F4P6
    Package TSSOP20
    Core Cortex-M0
    FLASH 16KB
    SRAM 4KB
    Max. Clock Speed 48MHz
    Crystals HSE (High Speed External) 8MHz
    LSE (Low Speed External) None
    Power Sources Any +3.3V pin (+3.3V)
    Any +5V pin (+5V)
    USB connector (+5V)
    Regulator manufacturer Shanghai TX Electronics Sci-Tech Co., Ltd
    Regulator part number TX6211B (DE=A1D)
    Regulator package SOT353
    Output +3.3V @ 300mA
    Battery holder No
    Connectivity Headers 2x 1x10 male dupont (2.54mm)
    Specific None
    Debug SWD (1x4 male dupont (2.54mm))
    USB Micro (+5V power only)
    I/O LEDs Power LED (+3.3V)
    User LED (PB1, sink)
    Buttons, switches and jumpers Reset button (NRST, active low)
    1-way jumper (BOOT0, active low)
    Other devices None
    PCB Colour Blue
    Size 28mm x 22mm
    Mounting Breadboard
    Remarks
    • Note: Because the STM32F030F4P6 does not support USB, only the power pins on the USB connector are connected.
    • Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.

    Pictures

    STM32F030F4P6 vcc-gnd.com

    STM32F030F4P6 vcc-gnd.com Top view

    STM32F030F4P6 vcc-gnd.com Bottom view

    Header 1

    Pin Connected to
    3.3 +3.3V rail
    5V +5V rail
    G Ground plane
    A14 PA14
    A13 PA13
    A10 PA10
    A9 PA9
    B1 PB1
    G Ground plane
    G Ground plane

    Header 2

    Pin Connected to
    A7 PA7
    A6 PA6
    A5 PA5
    A4 PA4
    A3 PA3
    A2 PA2
    A1 PA1
    A0 PA0
    F1 PF1
    F0 PF0

    USB

    Pin Connected to
    VCC +5V rail
    D- N.C.
    D+ N.C.
    ID N.C.
    GND Ground plane

    SWD

    Pin Connected to
    G Ground plane
    C PA14
    D PA13
    V +3.3V rail