Strange Thing
STM32F103C8T6
Board
Name | Strange Thing |
Part | Unknown |
Brand | Unknown |
Origin | China |
Microcontroller
Part | STM32F103C8T6 |
Manufacturer | ST-Microelectronics |
Core | Arm Cortex-M3 |
Max. Clock Speed | 72MHz |
Package | LQFP 48 pins |
Internal memories
FLASH | 64KiB |
SRAM | 20KiB |
Oscillators
HSI | 8MHz |
LSI | 40kHz |
HSE | 8MHz |
LSE | 32.768kHz |
Power
Sources | Any +3.3V pin (+3.3V) Any +5V pin (+5V) USB connector (+5V) |
VDDA pin | No |
VSSA pin | No |
VREF- pin | No |
VREF+ pin | No |
Backup battery | Pin |
Regulator
Manufacturer | Advanced Monolithic Systems Inc. |
Part | AMS1117 (AMS1117 ) |
Package | SOT223 3 pins |
Input | +4.6V to +15V |
Output | +3.3V @ 1A |
Datasheet | AMS1117.pdf |
PCB
Color | Black |
Size (w x l) | 34mm x 33mm |
Mounting | None |
Remarks
- Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.
Pictures
Resources
Inputs
Connectors
Devices
None
Inputs & outputs
Reset button
Name | NRST |
Reference | - |
Type | Button |
Connected to | NRST |
Mode | Active low |
BOOT0 jumper
Name | - |
Reference | - |
Type | 1-way jumper |
Connected to | BOOT0 |
Mode | Active low |
- Note: This jumper is part of Header 4.
BOOT1 jumper
Name | - |
Reference | - |
Type | 1-way jumper |
Connected to | PB2 |
Mode | Active low |
- Note: This jumper is part of Header 4.
Power LED
Name | - |
Reference | - |
Type | LED |
Connected to | +3.3V rail |
Mode | N.A. |
User LED
Name | - |
Reference | - |
Type | LED |
Connected to | PB0 |
Mode | Sink |
Connectors & headers
Header 1 properties
Name | Unknown |
Reference | None |
Type | Pin header (2.54mm, 8x2, male) |
Header 1 pins
# | Name | Function | Connected to |
---|---|---|---|
1 | A0 | - | PA0 |
2 | A1 | - | PA1 |
3 | A2 | - | PA2 |
4 | A3 | - | PA3 |
5 | A4 | - | PA4 |
6 | A5 | - | PA5 |
7 | A6 | - | PA6 |
8 | A7 | - | PA7 |
9 | A8 | - | PA8 |
10 | A9 | - | PA9 |
11 | A10 | - | PA10 |
12 | A11 | - | PA11 |
13 | A12 | - | PA12 |
14 | A13 | - | PA13 |
15 | A14 | - | PA14 |
16 | A15 | - | PA15 |
Header 2 properties
Name | Unknown |
Reference | None |
Type | Pin header (2.54mm, 8x2, male) |
Header 2 pins
# | Name | Function | Connected to |
---|---|---|---|
1 | B0 | - | PB0 |
2 | B1 | - | PB1 |
3 | B2 | - | PB2 |
4 | B3 | - | PB3 |
5 | B4 | - | PB4 |
6 | B5 | - | PB5 |
7 | B6 | - | PB6 |
8 | B7 | - | PB7 |
9 | B8 | - | PB8 |
10 | B9 | - | PB9 |
11 | B10 | - | PB10 |
12 | B11 | - | PB11 |
13 | B12 | - | PB12 |
14 | B13 | - | PB13 |
15 | B14 | - | PB14 |
16 | B15 | - | PB15 |
Header 3 properties
Name | Unknown |
Reference | None |
Type | Pin header (2.54mm, 13x1, male) |
Header 3 pins
# | Name | Function | Connected to |
---|---|---|---|
1 | 3.3 | - | +3.3V rail |
2 | 5V | - | +5V rail |
3 | GND | - | Ground plane |
4 | GND | - | Ground plane |
5 | C13 | - | PC13 |
6 | C14 | - | PC14 |
7 | C15 | - | PC15 |
8 | RST | - | NRST |
9 | BAT | - | VBAT |
10 | 3.3 | - | +3.3V rail |
11 | 5V | - | +5V rail |
12 | GND | - | Ground plane |
13 | GND | - | Ground plane |
Header 4: SWD & Serial properties
Name | Unknown |
Reference | None |
Type | Pin header (2.54mm, 6x2, male) |
Header 4: SWD & Serial pins
# | Name | Function | Connected to |
---|---|---|---|
1 | 5V | - | +5V rail |
2 | 3.3 | - | +3.3V rail |
3 | RX | - | PA10 |
4 | DIO | SWDIO | PA13 |
5 | TX | - | PA9 |
6 | CLK | SWCLK | PA14 |
7 | GND | - | Ground plane |
8 | GND | - | Ground plane |
9 | BT0 | - | BOOT0, pulled up by 10kΩ resistor |
10 | - | - | Ground plane |
11 | BT1 | - | BOOT1, pulled up by 10kΩ resistor |
12 | - | - | Ground plane |
USB connector properties
Name | Unknown |
Reference | None |
Type | USB Micro |
USB connector pins
# | Name | Function | Connected to |
---|---|---|---|
1 | - | VCC | +5V rail |
2 | - | D- | PA11 |
3 | - | D+ | PA12 |
4 | - | ID | N.C. |
5 | - | GND | Ground plane |