WeAct Blue Pill Plus Clone
STM32F103C8T6
Board
Name | WeAct Blue Pill Plus Clone |
Part | Blue Pill+ |
Brand | Unknown |
Origin | China |
Microcontroller
Part | STM32F103C8T6 |
Manufacturer | ST-Microelectronics |
Core | Arm Cortex-M3 |
Max. Clock Speed | 72MHz |
Package | LQFP 48 pins |
Internal memories
FLASH | 64KiB |
SRAM | 20KiB |
Oscillators
HSI | 8MHz |
LSI | 40kHz |
HSE | 8MHz |
LSE | 32.768kHz |
Power
Sources | Any +3.3V pin (+3.3V) Any +5V pin (+5V) USB connector (+5V) |
VDDA pin | No |
VSSA pin | No |
VREF- pin | No |
VREF+ pin | No |
Backup battery | None |
Regulator
Manufacturer | Unknown |
Part | Unknown |
Package | SOT23 3 pins |
Input | +3.6V to +5.5V |
Output | +3.3V @ 150mA |
Datasheet | Unavailable |
PCB
Color | Blue |
Size (w x l) | 20mm x 52mm |
Mounting | Breadboard |
Remarks
- Warning: This board is a clone of the official WeAct Blue Pill Plus board. For this reason, no schematics are included on this page. Please refer to the official WeAct Github page for more information.
Pictures
Inputs
Connectors
Devices
Inputs & outputs
Reset button
Name | NRST |
Reference | - |
Type | Button |
Connected to | NRST |
Mode | Active low |
BOOT0 button
Name | BOOT0 |
Reference | - |
Type | Button |
Connected to | BOOT0 |
Mode | Active high |
User button
Name | KEY |
Reference | - |
Type | Button |
Connected to | PA0 |
Mode | Active high |
Power LED
Name | PWR |
Reference | - |
Type | LED |
Connected to | +3.3V rail |
Mode | N.A. |
User LED
Name | PB2 |
Reference | - |
Type | LED |
Connected to | PB2 |
Mode | Sink |
Connectors & headers
Header 1 properties
Name | Unknown |
Reference | None |
Type | pin header (2.54mm, 20x1, male) |
Header 1 pins
# | Name | Function | Connected to |
---|---|---|---|
1 | 5V | - | +5V rail |
2 | G | - | Ground plane |
3 | 3.3 | - | +3.3V rail |
4 | R | - | NRST |
5 | B11 | - | PB11 |
6 | B10 | - | PB10 |
7 | B1 | - | PB1 |
8 | B0 | - | PB0 |
9 | A7 | - | PA7 |
10 | A6 | - | PA6 |
11 | A5 | - | PA5 |
12 | A4 | - | PA4 |
13 | A3 | - | PA3 |
14 | A2 | - | PA2 |
15 | A1 | - | PA1 |
16 | A0 | - | PA0 |
17 | C15 | - | PC15 |
18 | C14 | - | PC14 |
19 | C13 | - | PC13 |
20 | VB | - | VBAT |
Header 2 properties
Name | Unknown |
Reference | None |
Type | pin header (2.54mm, 20x1, male) |
Header 2 pins
# | Name | Function | Connected to |
---|---|---|---|
1 | B12 | - | PB12 |
2 | B13 | - | PB13 |
3 | B14 | - | PB14 |
4 | B15 | - | PB15 |
5 | A8 | - | PA8 |
6 | A9 | - | PA9 |
7 | A10 | - | PA10 |
8 | A11 | - | PA11 |
9 | A12 | - | PA12 |
10 | A15 | - | PA15 |
11 | B3 | - | PB3 |
12 | B4 | - | PB4 |
13 | B5 | - | PB5 |
14 | B6 | - | PB6 |
15 | B7 | - | PB7 |
16 | B8 | - | PB8 |
17 | B9 | - | PB9 |
18 | 5V | - | +5V rail |
19 | G | - | Ground plane |
20 | 3.3 | - | +3.3V rail |
USB connector properties
Name | Unknown |
Reference | None |
Type | USB C |
USB connector pins
# | Name | Function | Connected to |
---|---|---|---|
A1/B12 | - | GND | Ground plane |
A4/B9 | - | VBUS | +5V rail |
B8 | - | SBU2 | Ground plane via 5.1kΩ |
A5 | - | CC1 | N.C. |
B7 | - | D- | PA11 |
A6 | - | D+ | PA12 |
A7 | - | D- | PA11 |
B6 | - | D+ | PA12 |
A8 | - | SBU1 | Ground plane via 5.1kΩ |
B5 | - | CC2 | N.C. |
B4/A9 | - | VBUS | +5V rail |
B1/A12 | - | GND | Ground plane |
SWD header properties
Name | SW |
Reference | None |
Type | pin header (2.54mm, 4x1, male) |
SWD header pins
# | Name | Function | Connected to |
---|---|---|---|
1 | 3.3V | VCC | +3.3V rail |
2 | SWDIO | SWDIO | PA13 |
3 | SWCLK | SWCLK | PA14 |
4 | GND | GND | Ground plane |
Devices
Generic EEPROM properties footprint
Name | Unknown |
Reference | U3 |
Manufacturer | Unknown |
Part | Generic EEPROM |
Marking | Unknown |
Datasheet | Unavailable |
Package | SOP 8 pins |
Description | Generic I2C EEPROM |
Generic EEPROM pins footprint
# | Name | Function | Connected to |
---|---|---|---|
1 | - | /CS | PA4 |
2 | - | DO | PA6 |
3 | - | /WP | +3.3V rail |
4 | - | GND | Ground plane |
5 | - | DI | PA7 |
6 | - | CLK | PA5 |
7 | - | /HOLD | +3.3V rail |
8 | - | VCC | +3.3V rail |