STM32F407VGT6 - Diymore

STM32F407VGT6 Diymore

Overview

Board Name Diymore
Brand diymore.cc
Origin China
Microcontroller Part STM32F407VGT6
Package LQFP100
Core Cortex-M4
FLASH 1024KB
SRAM 128KB
64KB (CCM)
4KB (Backup)
Max. Clock Speed 168MHz
Crystals HSE (High Speed External) 8MHz
LSE (Low Speed External) 32.768kHz
Power Sources Any +3.3V pin (+3.3V)
Any +5V pin (+5V)
USB connector (+5V)
Regulator manufacturer Shanghai TX Electronics Sci-Tech Co., Ltd
Regulator part number TX6211B (DE=A1D)
Regulator package SOT353
Output +3.3V @ 300mA
Battery holder No
Connectivity Headers 2x 2x16 male dupont (2.54mm)
1x 2x12 male dupont (2.54mm)
Specific None
Debug None
USB Micro
I/O LEDs Power LED (LED1, +3.3V)
User LED (LED2, PE0, sink)
Buttons, switches and jumpers Reset button (K2, NRST, active low)
User button (PD15, active low)
1-way jumper (BOOT0, active low)
1-way jumper (BOOT1, active low)
Other devices None
PCB Colour Black
Size 60mm x 45mm
Mounting 4x mounting hole (M3)
Remarks
  • Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.

Pictures

STM32F407VGT6 vcc-gnd.com Small

STM32F407VGT6 vcc-gnd.com Small Top view

STM32F407VGT6 vcc-gnd.com Small Bottom view

Header 1

Pin Connected to
GND Ground plane
VCC +5V rail
GND Ground plane
3.3V +3.3V rail
PE0 PE0
PB7 PB7
PB6 PB6
PB5 PB5
PB4 PB4
PB3 PB3
PD7 PD7
PD6 PD6
PD5 PD5
PD4 PD4
PD3 PD3
PD2 PD2
PD1 PD1
PD0 PD0
PC12 PC12
PC11 PC11
PC10 PC10
PA15 PA15
PA14 PA14
PA13 PA13
PA12 PA12
PA11 PA11
PA10 PA10
PA9 PA9
PA8 PA8
PC9 PC9
GND Ground plane
VCC +5V rail

Header 2

Pin Connected to
PC8 PC8
PC7 PC7
PC6 PC6
PD15 PD15
PD14 PD14
PD13 PD13
PD12 PD12
PD11 PD11
PD10 PD10
PD9 PD9
PD8 PD8
PB15 PB15
PB14 PB14
PB13 PB13
PB12 PB12
3.3V +3.3V rail
PB11 PB11
GND Ground plane
PE15 PE15
PB10 PB10
PE13 PE13
PE14 PE14
PE11 PE11
PE12 PE12

Header 3

Pin Connected to
PB2 PB2
PE10 PE10
PE9 PE9
PE8 PE8
PE7 PE7
PE1 PE1
PB9 PB9
PB8 PB8
PB1 PB1
PB0 PB0
PC5 PC5
PC4 PC4
PA7 PA7
PA6 PA6
PA5 PA5
PA4 PA4
PA3 PA3
PC3 PC3
PA2 PA2
PA1 PA1
PA0 PA0
PC2 PC2
PC1 PC1
PC0 PC0
GND Ground plane
3.3V +3.3V rail
PC13 PC13
PE6 PE6
PE5 PE5
PE4 PE4
PE3 PE3
PE2 PE2

USB

Pin Connected to
VCC +5V rail
D- PA11
D+ PA12
ID N.C.
GND Ground plane