STM32F Core Board

STM32F407ZGT6


Board

NameSTM32F Core Board
PartUnknown
BrandUnknown
OriginChina

Microcontroller

PartSTM32F407ZGT6
ManufacturerST-Microelectronics
CoreArm Cortex-M4
Max. Clock Speed168MHz
PackageLQFP 144 pins

Internal memories

FLASH1024KiB
SRAM192KiB
Backup SRAM4KiB

Oscillators

HSI16MHz
LSI32kHz
HSE8MHz
LSE32.768kHz

Power

Sources
Any +3.3V pin (+3.3V)
Any +5V pin (+5V)
USB connector (+5V)
VDDA pinNo
VSSA pinNo
VREF- pinNo
VREF+ pinYes
Backup batterySoldered and pin (4.8mm / 4)

Regulator

ManufacturerAdvanced Monolithic Systems Inc.
PartAMS1117 (AMS1117)
PackageSOT89-3 3 pins
Input+4.6V to +15V
Output+3.3V @ 1A
DatasheetAMS1117.pdf

PCB

ColorBlue
Size (w x l)74mm x 46mm
MountingNone

Remarks

  • Warning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.
  • Warning: The microcontroller on this board features internal pull-up resistors for the USB data lines. However, this board has an additional switchable pull-up resistor on D+ (R14, controlled by PA8), which is disabled by default. This resistor is not needed and violates the USB specification when used at the same time as the internal pull-up resistors. This may cause errors while using USB on this board.

Pictures

STM32F Core Board: Perspective view
STM32F Core Board: Perspective view
STM32F Core Board: Top view
STM32F Core Board: Top view
STM32F Core Board: Bottom view
STM32F Core Board: Bottom view

Inputs & outputs


Reset button

Name RST
Reference -
Type Button
Connected to NRST
Mode Active low

BOOT0 jumper

Name BOOT0
Reference -
Type 2-way jumper
Connected to BOOT0
Mode N.A.

BOOT1 jumper

Name BOOT1
Reference -
Type 2-way jumper
Connected to PB2
Mode N.A.

User LED enable

Name JP_LED1
Reference -
Type 1-way jumper
Connected to Enables connection to LED1
Mode N.A.

Power LED

Name PWR
Reference -
Type LED
Connected to +3.3V rail
Mode N.A.

User LED

Name LED1
Reference -
Type LED
Connected to G3
Mode Sink

Connectors & headers


Header 1 properties

Name Unknown
Reference None
Type pin header (2.54mm, 29x2, male)

Header 1 pins

# Name Function Connected to
1 F6 - PF6
2 F7 - PF7
3 F8 - PF8
4 F9 - PF9
5 F10 - PF10
6 NRST - NRST
7 C0 - PC0
8 C1 - PC1
9 C2 - PC2
10 C3 - PC3
11 VR+ - VREF+
12 A0 - PA0
13 A1 - PA1
14 A2 - PA2
15 A3 - PA3
16 A4 - PA4
17 A5 - PA5
18 A6 - PA6
19 A7 - PA7
20 C4 - PC4
21 C5 - PC5
22 B0 - PB0
23 B1 - PB1
24 B2 - PB2
25 F11 - PF11
26 F12 - PF12
27 F13 - PF13
28 F14 - PF14
29 F15 - PF15
30 G0 - PG0
31 G1 - PG1
32 E7 - PE7
33 E8 - PE8
34 E9 - PE9
35 E10 - PE10
36 E11 - PE11
37 E12 - PE12
38 E13 - PE13
39 E14 - PE14
40 E15 - PE15
41 B10 - PB10
42 B11 - PB11
43 B13 - PB13
44 B12 - PB12
45 B15 - PB15
46 B14 - PB14
47 D9 - PD9
48 D8 - PD8
49 D11 - PD11
50 D10 - PD10
51 D13 - PD13
52 D12 - PD12
53 D15 - PD15
54 D14 - PD14
55 G3 - PG3
56 G2 - PG2
57 G5 - PG5
58 G4 - PG4

Header 2 properties

Name Unknown
Reference None
Type pin header (2.54mm, 29x2, male)

Header 2 pins

# Name Function Connected to
1 F4 - PF4
2 F5 - PF5
3 F2 - PF2
4 F3 - PF3
5 F0 - PF0
6 F1 - PF1
7 VBAT - VBAT
8 C13 - PC13
9 E5 - PE5
10 E6 - PE6
11 E3 - PE3
12 E4 - PE4
13 E1 - PE1
14 E2 - PE2
15 B9 - PB9
16 E0 - PE0
17 B7 - PB7
18 B8 - PB8
19 B5 - PB5
20 B6 - PB6
21 B3 - PB3
22 B4 - PB4
23 G14 - PG14
24 G15 - PG15
25 G12 - PG12
26 G13 - PG13
27 G10 - PG10
28 G11 - PG11
29 D7 - PD7
30 G9 - PG9
31 D5 - PD5
32 D6 - PD6
33 D3 - PD3
34 D4 - PD4
35 D1 - PD1
36 D2 - PD2
37 C12 - PC12
38 D0 - PD0
39 C10 - PC10
40 C11 - PC11
41 A14 - PA14
42 A15 - PA15
43 A12 - PA12
44 A13 - PA13
45 A10 - PA10
46 A11 - PA11
47 A8 - PA8
48 A9 - PA9
49 C8 - PC8
50 C9 - PC9
51 C6 - PC6
52 C7 - PC7
53 G7 - PG7
54 G8 - PG8
55 G5 - PG5
56 G6 - PG6
57 GND - Ground plane
58 3.3V - +3.3V rail

USB connector properties

Name USB
Reference None
Type USB Mini

USB connector pins

# Name Function Connected to
1 - VCC +5V rail
2 - D- PA11 via 12Ω (R12)
3 - D+ PA12 via 12Ω (R13)
4 - ID Header 2 pin 26
5 - GND Ground plane

JTAG header properties

Name JTAG1
Reference None
Type IDC (2.54mm, 10x2, male)

JTAG header pins

# Name Function Connected to
1 - VCC +3.3V rail
2 - VCC +3.3V rail
3 - TRST PB4
4 - GND Ground plane
5 - TDI PA15
6 - GND Ground plane
7 - TMS / SWDIO PA13
8 - GND Ground plane
9 - TCLK / SWCLK PA14
10 - GND Ground plane
11 - RTCK N.C.
12 - GND Ground plane
13 - TDO / SWO PB3
14 - GND Ground plane
15 - RESET NRST
16 - GND Ground plane
17 - N.C. N.C.
18 - GND Ground plane
19 - N.C. N.C.
20 - GND Ground plane

SWD header properties

Name SWD
Reference None
Type pin header (2.54mm, 15x2, male)

SWD header pins

# Name Function Connected to
1 3.3V VCC +3.3V rail
2 SWDIO SWDIO PA13
3 SWCLK SWCLK PA14
4 GND GND Ground plane

Serial header properties

Name UART
Reference None
Type pin header (2.54mm, 15x2, male)

Serial header pins

# Name Function Connected to
1 3.3V - +3.3V rail
2 TX - PA9
3 RX - PA10
4 GND - Ground plane